iPod nano Gen 2 disassembly manual

iPod nano Gen 2 disassembly manual.  With one side to the other movements, you release the iPod with the prying gently up and down. It will be held with glue and need to remove some pressure. Try the "Hold" first apply pressure at the end of the switch! Remove the 2 upper screws using the Phillips-head screw driver, remove these screws. Apply much pressure or you can end up with a stripped screw and you need to get a screw set (artisan makes available at Sears a good!). Removing the lining of the lower use, the same method as you for starters. It comes off with some work! Here you see that we at the end to snatch until we can solve it free of the adhesive.
Remove the two screws from the bottom remove the headphones plug slide a flat tool under this plug and begin to push it out. Be careful b/c he associated at this time with the main Board. It comes out as shown. This is as much as you want to remove the plug of the headphones at this point. Is the hidden screw underneath the headphone plug into this picture, which has already removed the screw, but the arrow shows where it was. Remove the Metal protector Just with a flat tool to snatch this piece the screws,'re out.

Download iPod nano Gen 2 disassembly manual