Use this iPad 2 manual installation guide to replace the electronic home button switch. This iPad 2 manual guide consists of 6 pages and 10 easy step by step instruction to follow. See some content snippet of iPad 2 WiFi home button installation below for more details:
Step 6 – When separating the front panel from the bottom left corner of the iPad 2, be careful not to rip the digitizer cable (highlighted in red in the first picture). It is extremely thin and easy to tear. Slightly lift the front panel near the dock connector to separate it from the foam adhesive securing it to the LCD. Use a guitar pick to help cut the foam adhesive securing the perimeter of the LCD to the front panel.
Step 7 – Carefully rotate the front panel away from the iPad, being sure that no adhesive is still attaching the two components. Do not put excessive strain on the digitizer cable.
Step 8 – Lay the front panel next to the rest of the iPad 2. Do not attempt to completely remove the front panel assembly just yet, as it is still attached to the logic board via the display ribbon cable.
Step 9 – Home Button Remove the two 2.1 mm Phillips screws securing the home button to the front glass panel.
Step 10 – Remove the home button from the front glass panel. Download Installing iPad 2 WiFi Home Button Source: www.ifixit.com
